Using LED Lights : How to Create a Daisy Chain with LED Lights


This is Kyle with Expert Village and today
we’re going to show you how to use an LED lighting system. All four lights in our output.
Now if you want to add number five, number six then you’re going to have to get this
fixed. But at least, for the moment, we can still use all four lights. And we’re talking
about the Chavet colormist controller, the LED lights. Now this is what you have. It’s
called an actual daisy chain. So when you hear that term you’re going to know that that
means this controller is controlling the actions of each and every one. In just a minute I’m
going to show you how we’re going to use this controller but for right now I just want to
show you that if I wanted to turn it to, let’s say, red I could hit red, they’re all going
to be red. I could hit green, they’re all going to be green. So basically everything
is controlled by one signal. So whatever this, whether we unplug this one, if we want to
unplug this, these are all still controlled by the same signal.

2 thoughts on “Using LED Lights : How to Create a Daisy Chain with LED Lights

Leave a Reply

Your email address will not be published. Required fields are marked *